Hydraulic Recovery Winch
HV-8
HV-8
Features
- Powered by a PTO/power take off unit driven pump
- Fast and variable recovery speeds for high work rate
- Highly efficient and reliable torque motor
- 2 stage planetary gear train for greater pulling force
- Easy to turn T-handle for rapid wire rope payout
- Drag brake and over-centre valve providing full 100% braking
- EN 14492-1 supported: 10:1 D/d ratio and 2:1 wire rope strength allow for severe duty car and commercial recovery
- Meet SAE J706, CE Machinery Directive 98/37/EC, and REMSA Standards
Dimensions
Specifications
| Rated line pull |
3,630 kg (SAE J706 rating);
3,560 kg (EN 14492-1 rating) |
| Line Speed |
15 m/min at 60 lt/min |
| Operation Pressure |
150 bar |
| Gear reduction |
16 : 1 planetary |
| Gear type |
2 stage planetary gear train |
| Winch construction |
Aluminum die cast housings with steel drum |
| Brake |
Spring applied drag brake together with over-centre valve supplied |
| Clutch (freespooling) |
Rotating ring gear |
| Rotation of winch |
Wire rope shall be under-wound orientation only |
| Drum diameter x length (Std. Drum) |
90 mm x 190 mm |
| Drum diameter x length (Long Drum) |
90 mm x 253 mm |
| Wire rope recommended |
10 mm diameter 1,960 N/mm2 grade |
|
40 m (standard drum);
55 m (long drum) |
| |
A minimum breaking strength of 69.8 KN is required |
Standard Accessories
- Roller fairlead
- Over-centre valve
Optional Accessories
- Cable tensioner
- Air clutch
Warning
- The winch is not intended to be used in any manner for the movement or lifting of personnel.
- The rated line pull shown is based on the first layer of rope on the drum.
- The rope winding on the drum shall remain 5 wraps from the drum.
Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
